Heavy Duty Cantilever Brackets

Heavy duty cantilever brackets for supporting steel beams to hang curtains from. The 400mm x 300mm gallows-style arms are made from 50mm x 50mm x 6mm angled steel. Can be used with RSJ brackets to provide support in awkward locations. Painted with one coat of primer. Colour may vary form that shown. ALL SIZES NOMINAL

Where no suitable fixing surface in available to mount a curtain rail onto, a new steel beam may have to be fitted to span your opening. These heavy duty  cantilever brackets can be used to support such a beam.  The universal 400mm x 300mm gallows-style format allows them to be fitted in two ways: with either the 300mm arm projecting forward or the 400mm arm projecting forward. NOTE: the 6mm steel which forms the two arms has fitting holes down its rear sides only for face mounting onto your supporting wall or frame. Should you need to side fit onto a surface, these brackets can be used in conjunction with our RSJ brackets (sold separately) to allow this.

Available in: 400mm x 300mm size only.

Note: All dimensions nominal. Subject to original manufacturer’s standard tolerances.

Technical Details:

Material: 6mm mild steel

Fixings: Not included. Need to be supplied by installer and be suitable for the surface being fitted too.

Recommended Environments: General Pedestrian, Food & Catering, Commercial, Pest Control.

Longevity: This product’s lifespan will be dictated by where it’s used, what type of traffic might move through it and how carefully (or aggressively) such traffic does so. This is beyond any manufacturer’s or suppliers control. Used appropriately, the product should last for many years.